Skip to main content

TOSEC: Coleco ColecoVision (2012-04-23)


Published April 23, 2012


The ColecoVision is Coleco Industries' second generation home video game console, which was released in August 1982. The ColecoVision offered near-arcade-quality graphics and gaming style along with the means to expand the system's basic hardware. Released with a catalog of 12 launch titles, with an additional 10 games announced for 1982, approximately 145 titles in total were published as ROM cartridges for the system between 1982 and 1984.

Coleco licensed Nintendo's Donkey Kong as the official pack-in cartridge for all ColecoVision consoles, and this version of the game was well received as a near-perfect arcade port, helping to boost the console's popularity. By Christmas of 1982, Coleco had sold more than 500,000 units, in part on the strength of its bundled game. The ColecoVision's main competitor was the arguably more advanced but less commercially successful Atari 5200. The ColecoVision was distributed by CBS Electronics outside of North America, and was branded the CBS ColecoVision.

Sales quickly passed 1 million in early 1983, before the video game crash of 1983. By the beginning of 1984, quarterly sales of the ColecoVision had dramatically decreased. Over the next 18 months, the Coleco company ramped down its video game division, ultimately withdrawing from the video game market by the end of the summer of 1985. The ColecoVision was officially discontinued by October 1985. Total sales of the ColecoVision are uncertain but were ultimately in excess of 2 million units, as sales had reached that number by the spring of 1984, while the console continued to sell modestly up until its discontinuation the following year.

In 1986, Bit Corporation produced a ColecoVision clone called the Dina, which was sold in the United States by Telegames as the Telegames Personal Arcade.

The main console unit consists of a 14×8×2 inch rectangular plastic case that houses the motherboard, with a cartridge slot on the right side and connectors for the external power supply and RF jack at the rear. The controllers connect into plugs in a recessed area on the top of the unit.
The design of the controllers is similar to that of Mattel's Intellivision—the controller is rectangular and consists of a numeric keypad and a set of side buttons. In place of the circular control disc below the keypad, the Coleco controller has a short, 1.5-inch joystick. The keypad is designed to accept a thin plastic overlay that maps the keys for a particular game. Each ColecoVision console shipped with two controllers.

All first-party cartridges and most third-party software titles feature a 12-second pause before presenting the game select screen. This delay results from an intentional loop in the console's BIOS to enable on-screen display of the ColecoVision brand. Companies like Parker Brothers, Activision, and Micro Fun bypassed this loop, which necessitated embedding portions of the BIOS outside the delay loop, further reducing storage available to actual game programming.

Browsing the Collection

There are over 500 images in this ColecoVision collection, all of them games or homebrew programs.

To browse the collection of software, click this link.


Identifier Coleco_ColecoVision_TOSEC_2012_04_23
Date 2012-04-23
Mediatype software
Publicdate 2013-02-28 07:56:21
Addeddate 2013-02-28 07:56:21
Year 2012
Language English


Reviews

There are no reviews yet. Be the first one to write a review.